Canon imageRUNNER 3530 Reference Manual page 115

Machine Function
Right Side
Output Tray
Additional
Copy Tray
Inner
Output Tray
Collate
Group
Offset
Staple
Hole Punch
Department ID
Management *2
Additional Paper
Supply
Security Management
(Hard Disk and Job
Logs)
*2 The Department ID Management function is a standard function in this machine. If the optional Card Reader-C1 is
attached, Department ID Management is performed automatically, and you do not have to enter the Department ID
and password manually. The Card Reader-C1 enables you to check the print totals and the remaining number of
pages that can be printed on the touch panel display.
Optional
Equipment Needed
Copy Tray-J1
Inner 2 Way Tray-D1
Additional Finisher 3 Way Unit-A1 and
Tray-B1
Finisher-S1
3 Way Unit-A1 and
Puncher Unit-R1
Card Reader-C1
Cassette Feeding
Unit-Y2
UFR II Printer Kit Expansion Bus and
and iR Security Kit USB Application
(activated)
Simultaneous Installation
Required
3 Way Unit-A1
The Inner 2 Way
Tray-D1 cannot be
used with the
Finisher-S1.
The Additional
Finisher Tray-B1
cannot be used with
Finisher-S1
the Inner 2 Way
Tray-D1.
3 Way Unit-A1
Finisher-S1
-
-
To use the Security
Management function,
the iR Security Kit
must be activated
after the Expansion
Interface Board
Bus and USB
Application Interface
Board are installed.
System Configuration
Limitations
-
3
-
-
-
-
3-7