Functions That Conserve Power - Canon imageRUNNER 3530 Reference Manual

Functions That Conserve Power

You can conserve power efficiently when the machine is not being used using the
following modes.
NOTE
•
The touch panel display turns OFF when the machine enters one of the energy saving
modes.
•
The machine can continue to receive fax documents, and process or print data sent from
computers even if it is in one of the energy saving modes described below.
■ Auto Sleep Mode
You can set the machine to enter the Sleep mode whenever you desire, by pressing the
control panel power switch, or specify to have the machine enter the Sleep mode at a
preset time. To reactivate the machine, press the control panel power switch again.
NOTE
•
Turn the control panel power switch OFF when not using the machine for a prolonged
period of time, for example, at night.
•
The time it takes for the machine to automatically enter the Sleep mode can be set from
10 seconds to 4 hours. The default setting is '1' hour. (See "Auto Sleep Time," on p.
4-67.)
•
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds
for the touch panel to be displayed after pressing the control panel power switch.
■ Daily Timer
The machine automatically enters the Sleep mode at the specified time and day of the
week set with the daily timer. To reactivate the machine, press the control panel power
switch.
NOTE
The Daily Timer settings can be set from Sunday to Saturday and 00:00 to 23:59. (See
"Daily Timer Settings," on p. 4-70.)
Overview of the imageRUNNER 3530/2830/2230
2
2-9