Envelope Feeder Attachment-C1 (Optional)
This section explains how to use the optional Envelope Feeder Attachment-C1.
IMPORTANT
The optional Envelope Feeder Attachment-C1 can only be attached to Paper Drawer 1.
How to Use the Envelope Feeder Attachment
The following six types of envelopes can be loaded into the envelope feeder
attachment: COM10, Monarch, DL, ISO-B5, ISO-C5, and Yougata 4.
If you are using COM10 envelopes, load them after checking the following:
•
Make sure that [COM10] is selected for ENV.1 in Common Settings (from the
Additional Functions screen).
•
The guides are adjusted to hold COM10 envelopes.
•
The paper size dial is set to 'Env.', and the size switch is set to 'ENV.1'.
7
7-10
Envelope Feeder Attachment-C1 (Optional)