Canon imageRUNNER 3530 Reference Manual page 457

Setting Restrict New Addresses in the System
Management Mode
You can set to restrict the sending of documents to destinations which are not
registered in the Address Book.
1
Enter the System Management mode.
NOTE
For instructions on entering the System Management mode, see "Entering the
System Management Mode," on p. II.
2
Press [Restrict New Addresses].
For instructions on specifying Restrict New Addresses, see Chapter 6, "System
Manager Settings," in the Facsimile Guide.
3
Press [Done] repeatedly until the Basic Features screen
appears.
System Management of the imageRUNNER 3530/2830/2230
VII