Canon imageRUNNER 3530 Reference Manual page 193

2
Press [▼] or [▲] until [Energy Consumption in Sleep Mode]
appears ➞ press [Energy Consumption in Sleep Mode].
3
Select [Low] or [High] ➞ press [OK].
Details of each item are shown below.
[Low]: Energy consumption in the Sleep mode is low, but it takes longer to
recover from the Sleep mode.
[High]: Energy consumption in the Sleep mode is high, but it takes shorter to
recover from the Sleep mode.
The selected mode is set.
NOTE
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10
seconds for the touch panel to be displayed after pressing the control panel power
switch.
Specifying Common Settings
4
4-37