Auto Clear Time - Canon imageRUNNER 3530 Reference Manual

3

Auto Clear Time

If the machine is idle for a certain period of time (after the last print job or key
operation is performed), the display returns to the Basic Features screen (standard
settings) of the selected function. This period of time is called the "Auto Clear
Time."
4
The Auto Clear Time mode can be set from 0 to 9 minutes in one minute
increments, and can also be set to 'Off'.
NOTE
•
If '0' is selected, the Auto Clear Time mode is not set.
•
The default setting is '2' minutes.
1
4-68
Timer Settings
The Auto Sleep Time can be set from 10 seconds, 1, 2, 10, 15, 20, 30, 40, 50
minutes, 1 hour, 90 minutes, 2, 3, and 4 hours.
The selected mode is set.
Press [Done] repeatedly until the Basic Features screen
appears.
(Additional Functions) ➞ [Timer Settings] ➞
Press

[Auto Clear Time].