Periodic Inspection of the Breaker
This machine has a breaker that detects excess current or leakage current. Be sure
to test the breaker once or twice a month using the following procedure.
IMPORTANT
•
Make sure that the main power is turned ON, and the machine is neither printing nor
scanning before inspecting the breaker.
•
If a malfunction occurs after an inspection, contact your local authorized Canon dealer.
•
The type of breaker may vary according to the manufacturer. There are two types of
breakers, but the switching procedure is fundamentally the same.
Checking the Breaker
1
Push the test button with the tip of a ball-point pen, or a
similar object.
IMPORTANT
Briefly push the test button.
NOTE
The breaker is located on the back of the machine.
xxix