•
If you select [Free Size] for printing documents stored in an inbox, you cannot use the
Finisher, Two-sided, Cover/Sheet Insertion, or Cover/Job Separator mode. (See Chapter
1, "Introduction to the Mail Box Function," in the Mail Box Guide.)
•
If you select [Envelope] for printing documents stored in an inbox, you cannot use the
Finisher, Two-sided, Cover/Sheet Insertion, or Cover/Job Separator mode. (See Chapter
1, "Introduction to the Mail Box Function," in the Mail Box Guide.)
NOTE
•
When scanning the following originals, you cannot use the Automatic Paper Selection
mode. Use the Manual Paper Selection mode when scanning these types of originals:
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- STMT or STMTR originals that are placed on the platen glass
•
Envelopes may be creased in the printing process.
•
For high-quality printouts, use paper recommended by Canon.
•
For more information on paper types that can be used with this machine, see "Available
Paper Stock," on p. 2-45.
■ Standard Size
You can select standard inch paper, or A or B series paper. if you are using STMT size
paper, make sure to load the paper horizontally.
■ Free Size
You can load nonstandard paper sizes (5 9/16" x 7 1/8" to 11 5/8" x 17"
(140 mm x 182 mm to 297 mm x 432 mm)).
■ Envelope
The following envelopes can be loaded into the stack bypass:
•
COM10:
4 1/8" x 9 1/2" (104.7 mm x 241.3 mm)
•
ISO-B5:
7" x 9 7/8" (176 mm x 250 mm)
•
Monarch:
3 7/8" x 7 1/2" (98.4 mm x 190.5 mm)
•
ISO-C5:
6 3/8" x 9" (162 mm x 229 mm)
•
DL:
4 3/8" x 8 5/8" (110 mm x 220 mm)
•
Yougata 4:
4 1/8" x 9 1/4" (105 mm x 235 mm)
For more information on specific envelope measurements, see "Available Paper Stock,"
on p. 2-45.
Making Prints Using the Stack Bypass
2
2-31