Canon imageRUNNER 3530 Reference Manual page 198

4
4
4-42
Specifying Common Settings
[Printer] appears only if the optional UFR II Printer Kit is installed.
[Fax] appears only if the optional Super G3 FAX Board is installed.
[Other] is used for specifying report printing settings.
If you want to use an output tray for only one function, select only that function.
The selected mode is set.
IMPORTANT
•
If a certain tray reaches its stacking limit, the machine automatically uses another
tray that is designated for the same function. However, it is recommended that you
only designate one tray for fax documents to prevent them from getting lost.
•
If the optional Finisher-S1 and Copy Tray-J1 are attached and the Staple mode is
set, the sheets are output to Tray A, regardless of the Tray Designation settings.
•
If the optional Finisher-S1 and Copy Tray-J1 are attached and the following paper is
selected, the sheets are output to Tray A, regardless of the Tray Designation
settings: nonstandard, envelopes, heavy paper, transparencies, labels, or tracing
paper.
•
If the optional Inner 2 Way Tray-D1 and Copy Tray-J1 are attached and the
following paper is selected, the sheets are output to any output tray other than
Copy Tray-J1, even if the Copy Tray-J1 is specified as the destination: nonstandard,
envelopes, heavy paper, transparencies, labels, or tracing paper.
Press [Done] repeatedly until the Basic Features screen
appears.