Replacing Light Bulbs - Montigo P42DF Installation & Maintenance Manual

Replacing Light Bulbs

The P42DF* light bulbs can be replaced in a few simple steps. Follow
the directions for removing the door on page 21. Once the door has
successfully been removed, proceed with figures 23 - 23b.
Figure 23. Remove the up-lighting glass from the burner tray.
Figure 23a. Remove bulbs by holding one end and pushing
side case. Replace with new bulbs.
Figure 23b. Rotate newly replaced bulbs in a full circle. Place
glass back in the burner tray.
XG0195-030712
Maintenance
P42DF* Indoor Gas Fireplace
Page 23