Table of Contents
Advertisement
Wireless Network
j
If the machine is configured for your network,
choose the machine from the list, and then click
Next.
BRWXXXXXXXXXXXX
Note
• You can find your machine's IP address and
the node name by printing out the Network
Configuration List. See Print the Network
Configuration List on page 43.
• If your wireless settings fail, an error message
will appear during the installation of
Multi-Function Suite and the installation will be
terminated. Confirm your network setting by
following the on-screen instruction. If you
encounter this failure, please go to step 17 on
page 30 and setup the wireless connection
again.
• If you are using WEP and the LCD displayed
'Connected' but your machine is not found,
make sure you entered the WEP key correctly.
The WEP key is case sensitive.
• If the machine is not yet configured for use on
your network, the following screen appears.
Click OK and then Configure IP Address.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
XXXX
k
If you do not want to monitor the machine
status and error notification from your
computer, uncheck Enable Status Monitor
and then click Next.
l
The installation of the Océ drivers will
automatically start. The installation screens
appear one after another.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
®
For Windows Vista
, when this screen appears,
click the check box and click Install to complete
the installation correctly.
O c e P r i n t e r s
m
When the On-Line Registration screen is
displayed, follow the on-screen instructions.
Once you have completed the registration
process, close your web browser to return to
this window.
Then click Next.
®
Windows
37
Advertisement
Table of Contents
