Programs; Registering And Changing Keystroke Programs - Ricoh 9050b Operating Instructions Manual

7. Appendix

Programs

If you regularly send documents to a particular destination or transmit using the same functions, you can
save repetitive number keys operations by registering this information in a Keystroke Program. Programs
can be recalled by just pressing a programmed key.

Registering and Changing Keystroke Programs

This section explains how to program a new Keystroke Program or overwrite an old one.
You can register the following items in Keystroke Programs:
• Memory Transmission/Immediate Transmission, transmission type, destinations (except for folder
destinations), Scan Type, Resolution, Scan Size, Mixed Original Sizes, Auto Density, Manual Density,
Original Orientation, Original Settings, Stamp, Select Line, SUB/SID/SEP/PWD Code entry, Send
Later, Reception Notice, BCC Transmission, E-mail TX Results, Text, Standard Message, Auto Reduce,
Label Insertion, Closed Network, SUB Code Transmission, SEP Code Reception, Fax Header Print,
TX Status Report, Store File, File Type, Preview before transmission
• Program name
The following procedure explains using Send Later with the fax number "0123456789" as an example
7
of how to register a program.
1. Make the settings you want to register in the program.
The procedure for programming differs depending on the items you want to register.
Press the [Clear Modes] key to cancel programming.
Press [0], [1], [2], [3], [4], [5], [6], [7], [8], [9] using the number keys, and then continue doing the
Send Later setting until the standby display appears when you press [OK].
2. Make sure that the machine is in facsimile mode and the standby display is shown.
If the standby display is not shown, press the [Facsimile] key.
3. Press the [Program] key.
304
BAT182S