Specifying Tray For Lines; Where Incoming Documents Are Delivered - Output Tray - Ricoh 9050b Operating Instructions Manual

• You can load a maximum of 100 sheets of standard paper in the bypass tray.
• You can use a size of paper not loaded in the paper tray(s) in the bypass tray.
• The machine can detect A6 , A5 , A4 , A3
sizes. When you load any other size, specify the paper size. However, if the specified paper size and
size of paper set in the bypass tray do not match, paper jams may occur, or the image may be
shortened.
• Documents printed on paper smaller than A4 may be shortened, or split across sheets.
• Paper longer than 600 mm may be creased, not sent, or jam.
• Print area depends on optional expansion memory, resolution, and vertical length of originals.
• If you use this function, Image Rotation and 180-degree rotating printing are not possible.

Where Incoming Documents Are Delivered - Output Tray

You can specify the output tray or output position to facilitate separation of received documents.

Specifying tray for lines

Use this function to specify the output tray for each line port.
You can specify the document feeding tray for each port (telephone, Internet Fax, IP-Fax). For example,
you can specify documents received through the G3-1 port to be fed to the "Finisher Upper Tray" and
documents received through the G3-2 port to be fed to the "Finisher Shift Tray", facilitating separation of
files. You can also set the machine to output Internet Fax documents and ordinary faxes onto different trays.
• The optional extra G3 interface unit is required to use the extra G3 line.
• To use this function, specify the port and destination using [Specify Tray for Lines] in the Facsimile
Features menu. For details about the setting, see "Facsimile Features", General Settings Guide.
Tray Shift
Use this function to shift the output position for each document, so you can separate received documents
easily.
When the optional finisher unit is selected for fax output, you can use the Tray Shift function whenever a
fax or report is printed.
This is useful for separating faxes stacked in the finisher output tray. For example, if the previous incoming
fax was output to the left, the next incoming fax will be output to the right and vice-versa.
1 1 1
(5 / × 8 / , 8 / × 11 , 11 × 17 ) paper
2 2 2
Printing Options
3
207