Ricoh 9050b Operating Instructions Manual page 427

11 × 17 , 8
13 , 8 × 10
15 , 11 × 14 , 10 × 15 , 10 × 14
• 1000-sheet finisher
A3 , B4 JIS , A4
11 × 17 , 8
13 , 8 × 10
, 10 × 15 , 10 × 14
Staple
• The following type of paper cannot be stapled:
• Postcard
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Thick paper
• Curled paper
• Paper of low stiffness
• Paper of mixed sizes
• The 1000-sheet finisher and the booklet finisher do not support the Staple in Mixed Sizes mode.
When stapling mixed size originals with the finisher, select Auto Reduce/Enlarge.
• You can specify how the machine responds if its memory becomes full during copying, or if the
number of copies exceeds the capacity of the stapler:
• Divides the copies into the number of sheets that can be stapled
• Cancels the stapling job
• To specify Left 2, Top 2, or Slant together with 2 Originals or 8 Originals of Combine 1 Side,
or 4 Originals or 16 Originals of Combine 2 Sides: specify
and specify
• To specify Left 2, Top 2, or Slant together with Double Copies: specify paper for
originals and specify
• When the booklet finisher or the 3000-sheet finisher is installed, even if you place different size
originals in the ADF, appropriate size of copy paper can be automatically selected and stapled
using the Mixed Sizes mode and Auto Paper Select function. Load the paper you want to use in
the paper trays beforehand. Paper sizes that can be stapled when using the Mixed Sizes mode
are as follows:
• A3 and A4
• B4 JIS and B5 JIS
1 1
/ × 14 , 8 / × 13 , 8
2 2
1
/ , 8 × 10 , 7
2
, B5 JIS
1 1
/ × 14 , 8 / × 13 , 8
2 2
1
/ , 8 × 10 , 7
2
paper for orientation originals.
paper for orientation originals.
1 1
/ × 11 , 8 /
2 4
1 1 1
/ × 10 / , 5 / × 8
4 2 2
1 1
/ × 11 , 8 /
2 4
1 1
/ × 10 / , 12 × 18 , 11 × 15 , 11 × 14
4 2
paper for
Supplementary Information
1
× 14 , 8 / × 13 , 8 ×
4
1
/ , 12 × 18 , 11 ×
2
1
× 14 , 8 / × 13 , 8 ×
4
orientation originals
orientation
5
175