LifeFitness 9100 Service Manual page 95

Life Fitness Models 9100, 9500HR, 9700HR, and 9700HR w/Decline Treadmills
How To... Replace The Smart Stop for Models TR9500 and TR9700 only
Tools Required: Phillips Screwdriver
Step 1
Smart Stop
Turn the unit power OFF at the switch, then unplug
the line cord at the wall outlet.
Step 2
Remove two screws from the PCB COVER between
the handle bars.
Step 3
Disconnect 4 Pin Connector from the PCB board and
discard the board.
Step 4
Install new PCB board in reverse order.
30