Rear Roller - LifeFitness 9100 Service Manual

Life Fitness Models 9100, 9500HR, 9700HR, and 9700HR w/Decline Treadmills
How To... Replace The Rear Roller
Tools Required: Hex key wrench set, socket and ratchet set, and Phillips screwdriver
Step 1
Turn the unit power OFF at the switch,

Rear Roller

then unplug the line cord at the wall
outlet.
Step 2
Remove the REAR ROLLER GUARDS.
Step 3
Remove tension bolts from REAR
Striding Belt
ROLLER.
Step 4
Tension Bolts
Remove the REAR ROLLER.
Rear Roller Guards
Step 5
Install the new rear roller making sure the striding belt is properly adjusted and tensioned. Refer to "HOW
TO...Replace Striding Belt" for proper belt adjustment and tensioning.
9