LifeFitness 9100 Series Service Manual
  1. Manuals
  2. Brands
  3. LifeFitness Manuals
  4. Treadmill
  5. 9100
  6. Service manual

LifeFitness 9100 Series Service Manual

Heartrate and telemetry equipped treadmills
Hide thumbs Also See for 9100 Series:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
9100 Series Heartrate and Telemetry Equipped Treadmills
Customer Support Services

SERVICE MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9100 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LifeFitness 9100 Series

Summary of Contents for LifeFitness 9100 Series

  • Page 1: Service Manual

    9100 Series Heartrate and Telemetry Equipped Treadmills Customer Support Services SERVICE MANUAL...
  • Page 2 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills INTRODUCTION HOW TO USE THIS SERVICE MANUAL In the unlikely event that an operating problem may occur with your Life Fitness model 9100 aerobic trainer, this Service Manual will instruct and guide you on the quickest, most efficient manner in which to approach the situation.

  • Page 3: Table Of Contents

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills TABLE OF CONTENTS Introduction (How To Use This Service Manual) Table of Contents SECTION I Page Troubleshooting Guides Belt Slips Or Display Reads Error....................1 Display Will Not Program Password Or Locked In Password Mode..........2 Noisy Treadmill..........................3...
  • Page 4 ©1997 Life Fitness. All rights reserved. The Life Fitness trademark is register in the U.S. Patent and Trademark Office, Certificate No. 1,400,502, issued July 8, 1986. FlexDeck, Zone Trainer and Heart Rate Zone Training are trademarks of Life Fitness. Any use of these trademarks, without the express written consent of Life Fitness, is forbidden. U.S.

  • Page 5: Troubleshooting Guide

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: "Slowdown". Striding Belt slips during footfall or display reads "Press Start to Resume", or "Note Max. Speed Is Reduced To". Malfunction Probable Cause Corrective Action Striding belt slips on front roller Check striding belt &...

  • Page 6: Display Will Not Program Password Or Locked In Password Mode

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Display Will Not Program Password or Locked In Password Mode Malfunction Probable Cause Corrective Action Incorrect entries Only 3 digits are acceptable as a password Display will not accept (entries 1 through 999).

  • Page 7: Noisy Treadmill

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Noisy Treadmill Malfunction Probable Cause Corrective Action Faulty rear roller bearings. Replace rear roller assembly. Knocking sound at rear of machine Wax build up on rear roller.

  • Page 8: Display Does Not Illuminate Or Respond To Input

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Display Does Not Illuminate or Respond To Input Malfunction Probable Cause Corrective Action Insufficient power source. Plug treadmill into a dedicated 120V, 20 Display does not illuminate...

  • Page 9: Unit Resets Randomly

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Unit Resets Randomly Malfunction Probable Cause Corrective Action Insufficient power source. Plug treadmill into a dedicated 120V, 20 Unit resets randomly amp circuit. Damaged ground prong on line Replace line cord.

  • Page 10: No Power

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: No Power Malfunction Probable Cause Corrective Action On/Off switch. Is unit turned on? No Power Insufficient power source. Plug treadmill into a dedicated 120V, 20 amp circuit.

  • Page 11: Wax Will Not Fill Properly

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Wax Will Not Fill Properly Malfunction Probable Cause Corrective Action Fill valve in kit has crimped fill Check the fill valve for proper operation. Wax will not fill hose.

  • Page 12: Wax Is Leaking From Treadmill

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Wax Is Leaking From Treadmill Malfunction Probable Cause Corrective Action Partially open or faulty fill valve. Fully close fill valve. Wax Leak Loose hose connections. Inspect hose connections and secure as necessary.

  • Page 13: Striding Belt Comes In Contact With Frame And End Caps

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Striding Belt Comes In Contact With Frame and End Caps Malfunction Probable Cause Corrective Action Worn striding belt or user Center striding belt according to belt The Striding Belt is traveling pushing belt.
  • Page 14 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: "Notify Maintenance" - "Speed Control Error" Malfunction Probable Cause Corrective Action Faulty Power Verify power is a dedicated outlet. To Speed control error verify, turn breaker at panel to off. Using a voltmeter, take a voltage reading at electrical outlet.

  • Page 15: Striding Belt Not Centered On Deck

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Striding Belt Not Centered On Deck Malfunction Probable Cause Corrective Action Improper walking/running. Striding belt mis-alignment Striding belt tension needs to See How To... Adjust and Tension the Striding belt not centered be adjusted.

  • Page 16: Lift Error

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Display reads "Notify Maintenance Lift Control Error" Malfunction Probable Cause Corrective Action Unit intermittently stuck in up Press 9-1-9 ENTER, press INCLINE down Lift Error position button.

  • Page 17: Display Reads "Notify Maintenance" - "Waxer Disconnect

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Display reads "Notify Maintenance” “Waxer Disconnect" Malfunction Probable Cause Corrective Action Waxer Wax assembly electrical line Verify waxer cable is plugged into Disconnect cord electrical outlet on front frame assembly.
  • Page 18 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: Lifepulse Heart Rate System Does Not Respond, Erratic Heart Rate Reading Malfunction Probable Cause Corrective Action Dirty handlebar sensors. Wipe sensors with a clean soft cloth. Lifepulse Heart Rate System...

  • Page 19: No Telemetry Reading

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills TROUBLESHOOTING GUIDE Symptom: NO TELEMETRY READING Malfunction Probable Cause Corrective Action Chest strap sensors not making Adjust chest strap No Chest Strap detected. good contact with body of user. Moisten sensors to make better contact with skin Loose connection at receiver.
  • Page 20 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills NOTES:...

  • Page 21: Diagnostic Tests

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE SERVICE MODE WARNING: DO NOT STAND ON THE STRIDING BELT WHILE ENTERING THE SERVICE MODE OR WHILE PERFORMING ANY OF THE DIAGNOSTIC TESTS. NOTE: TO ACCESS A SPECIFIED DIAGNOSTIC PROGRAM, USE THE PROGRAM KEYS.
  • Page 22 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE DISPLAY TEST This test indicates if the Display is working properly. TO ENTER INTO THE DISPLAY TEST TURN "ON" THE HILL AND RANDOM KEYS The information that will be displayed in this mode is as follows: ±...
  • Page 23 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE EEPROM MODE This test indicates the amount of memory and allows for changes in the program times. TO ENTER INTO THE TEST TURN "ON" THE HILL, RANDOM AND FIT TEST PROGRAM KEYS.
  • Page 24 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE INCLINE CONTROL TEST This test indicates if the unit is reaching or lowering to the user's chosen level. TO ENTER INTO THE INCLINE CONTROL TEST TURN "ON" THE HILL PROGRAM KEY.
  • Page 25 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE VIEWING OF USAGE STATISTICS This mode supplies statistics and code versions of the Treadmill. TO ENTER INTO THE VIEWING OF USAGE STATISTICS TESTS TURN "ON" THE RANDOM AND FIT TEST PROGRAM KEYS The information that will be displayed in this mode is as follows: ±...
  • Page 26 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE WAXER CONTROL TEST This test indicates the status of the waxing system. TO ENTER INTO THE TEST TURN "ON" THE FIT TEST PROGRAM KEY. The information that will be displayed in this mode is as follows: ±...
  • Page 27 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE HEART RATE MONITORING MODE This test indicates if the heart rate program is operating properly. TO ENTER INTO THE TEST TURN "ON" THE HEART RATE PROGRAM KEY.
  • Page 28 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills DIAGNOSTIC TESTS How To...EXECUTE THE SPEED CONTROL OPERATION TEST This test indicates if the unit is running at the actual speed that the user has chosen. TO ENTER INTO THE TEST ALL PROGRAM KEYS SHOULD BE IN THE “OFF” POSITION.
  • Page 29 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE ANTI-SCUFF PADS Tools Required: Pencil, non-abrasive cleaner, paper towels Step 1 Use a pencil to draw an outline of the upper corners of the worn ANTI-SCUFF PAD on the FRAME.

  • Page 30: How To

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE DEBRIS BRUSH Tools Required: Short phillips screwdriver Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet. Step 2 Carefully tilt the treadmill on its side.

  • Page 31: Anti-Static Cords

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE ANTI-STATIC CORDS Tools Required: Needle-nose pliers ATTENTION: THE 9100 TREADMILL HAS TWO ANTI-STATIC CORDS. ONE IS LOCATED BEHIND/BETWEEN THE STRIDING BELT, THE OTHER BENEATH. EITHER OF THESE TWO MAY BREAK OR REQUIRE REPLACEMENT.

  • Page 32: Deck

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE DECK Tools Required: Hex key wrench set, socket and ratchet set ATTENTION: IF THE DECK IS TO BE REPLACED OR FLIPPED TO AN UNUSED SIDE, THE STRIDING BELT MUST BE REPLACED AT THIS TIME.
  • Page 33 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE DECK (Continued)

  • Page 34: Transformer

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE TRANSFORMER Tools Required: Standard screwdriver, hex key wrench set, wire cutting tool Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.

  • Page 35: Lifesprings

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE LIFESPRINGS Tools Required: Hex key wrench set, socket and ratchet set Step 1 Turn the power OFF by unplugging the unit at the wall outlet. Step 2 Remove the DECK (See "How To...").

  • Page 36: Pc Control Board

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE PC CONTROL BOARD Tools Required: Standard and phillips screwdriver, hex key wrench set Step 1 Enter into the Service Menu, with the existing PC CONTROL BOARD still in place, by pressing 9-1-9, ENTER. With all the Program Keys OFF (0000), record the total number of unit hours in use displayed on the CONSOLE.

  • Page 37: Pc Control Board

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE PC CONTROL BOARD ( Continued ) __________________________________________________________________________________ _ Step 14 Enter into the Service Menu by pressing 1-0-1, ENTER. Step 15 Press the FIT TEST Program Key (0001) and then press the ENTER key the total number of times the WAX MOTOR/PUMP had previously discharged with the worn PC CONTROL BOARD in operation.

  • Page 38: Display Console

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE DISPLAY CONSOLE Tools Required: Phillips screwdriver, hex key wrench set Step 1 Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet.
  • Page 39 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE STOP SWITCH Step 1 Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet. Step 2 Remove the DISPLAY CONSOLE from the machine (See “How To...”).
  • Page 40 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE TELEMETRY / HR KIT Tools Required: Phillips screwdriver Step 1 Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet.
  • Page 41 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To... REMOVE AND REPLACE THE HANDRAILS Tools Required: Phillips screwdriver, hex key wrench set, socket and ratchet set Step 1 Turn the power OFF at the ON/OFF switch and by unplugging...
  • Page 42 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE HANDLEBAR Tools Required: Phillips screwdriver, hex key wrench set, socket and ratchet set Step 1 Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet Step 2 Remove the DISPLAY CONSOLE (See "How To...").
  • Page 43 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE WAX MOTOR/PUMP Tools Required: Standard screwdriver, vise grips or clamp, hex key wrench set, socket and ratchet set Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 44 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE DRIVE MOTOR Tools Required: Standard screwdriver, hex key wrench set, straightedge Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.

  • Page 45: Drive Motor

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE DRIVE MOTOR (Continued)

  • Page 46: Separate The Front And Rear Frame Assemblies

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How to...SEPARATE THE FRONT AND REAR FRAME ASSEMBLIES Tools Required: Standard screwdriver, hex key wrench set, socket and ratchet set Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 47 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...SEPARATE THE FRONT AND REAR FRAME ASSEMBLIES (Continued)
  • Page 48 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE STRIDING BELT Tools Required: Standard screwdriver, hex key wrench set, socket and ratchet set CAUTION: DO NOT REMOVE OR LOOSEN THE FRONT ROLLER WHENEVER REMOVING OR INSTALLING A NEW OR EXISTING STRIDING BELT.
  • Page 49 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE STRIDING BELT (Continued)
  • Page 50 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE LIFT ACTUATOR Tools Required: Hex key wrench set, two 9/16" wrenches, wire cutting tool Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 51 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE MOTOR CONTROLLER Tools Required: Standard screwdriver, hex key wrench set Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 52 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE REAR ROLLER Tools Required: Standard screwdriver, hex key wrench set, socket and ratchet set Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 53 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE POWER BOX Tools Required: Standard screwdriver, hex key wrench set, wire cutting tool Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 54 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE WAX CONTAINER Tools Required: Standard screwdriver, hex key wrench set, socket and ratchet set Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.

  • Page 55: Wax Container

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE WAX CONTAINER (Continued)
  • Page 56 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE FRONT ROLLER Tools Required: Standard screwdriver, socket and ratchet set, hex key wrench set, ruler, straightedge Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 57 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE FRONT ROLLER (Continued)
  • Page 58 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...REMOVE AND REPLACE THE MAIN DRIVE MOTOR BELT Tools Required: Standard screwdriver, hex key wrench set, socket and ratchet set, ruler, straightedge Step 1 Turn the power OFF at the switch and by unplugging the unit at the electrical outlet.
  • Page 59 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To..REMOVE AND REPLACE THE MAIN DRIVE MOTOR BELT (Continued)

  • Page 60: How To...adjust And Tension The Striding Belt

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...ADJUST AND TENSION THE STRIDING BELT Tools Required: 5/16” Hex key wrench set This instruction is to be followed when: A. CENTERING THE EXISTING OR NEW STRIDING BELT. B. TENSIONING THE EXISTING STRIDING BELT.
  • Page 61 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...ADJUST AND TENSION THE STRIDING BELT (Continued) Step 2 Before proceeding it is helpful to visualize the REAR ROLLER pivot point as shown in the Figure below. Each adjustment made to one side of the ROLLER must be met with an equal and opposite adjustment to the other side of the ROLLER to maintain an ideal STRIDING BELT tension at the pivot point.
  • Page 62 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...ADJUST AND TENSION THE STRIDING BELT (Continued) Step 4 Alternately turn the BELT TENSIONING BOLTS 1/4 turn clockwise to tension, not to exceed 1 full turn. Repeat Steps 2 and 3 until the STRIDING BELT no longer slips. See Section A for BELT centering procedures.
  • Page 63 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...ADJUST AND TENSION THE STRIDING BELT (Continued) D. REPLACING THE STRIDING BELT WITH A NEW STRIDING BELT CAUTION: WHENEVER REMOVING OR REINSTALLING AN EXISTING STRIDING BELT, DO NOT REMOVE OR LOOSEN THE FRONT ROLLER.
  • Page 64 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills How To...ADJUST AND TENSION THE LIFT ACTUATOR Tools Required: Hex key wrench set, two 9/16” wrenches, phillips screwdriver ATTENTION: THIS PROCEDURE SHOULD BE PERFORMED TO INSURE THAT THE LIFT ACTUATOR ASSEMBLY’S MOTOR IS BEING SHUT OFF BY THE HOME SWITCH RATHER THAN THE LIFT ACTUATOR’S INTERNAL SAFETY SWITCH.
  • Page 65 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills NOTES:...
  • Page 66 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills NOTES:...

  • Page 67: Stop Switch

    Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION Model 9100T - GK26-00020-0100, SERIAL RANGE 336894 - 339359 4-25-97 Pilots: 336369 - 336380 & 336775 - 336834 Item N.B. Part Number Description Ref. 0017-00009-0808 NEEDLE VALVE 0017-00009-0813 NIPPLE, 3/16 IN.
  • Page 68 Model 9100T (Continued) Item N.B. Part Number Description Ref. (Continued from previous) OK26-01848-0000 ENDCAP (console) OK26-01687-0003 ENDCAP; REAR RT OK26-01688-0003 ENDCAP; REAR LF OK26-01232-0001 ENDCAP; HANDRAIL ∗ ∗ ∗ ∗ SK40-00045-0001 POLAR RECEIVER ∗ ∗ ∗ ∗ OK26-01360-0000 PLASTIC T/BOX ∗...
  • Page 69 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION (Cont.) Model 9100T (Cont.)
  • Page 70 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION Model 9100HR GK26-00022-0100, SERAIL RANGE 345780 - 349474 4-25-97 Item N.B. Part Number Description Ref. 0017-00009-0808 NEEDLE VALVE 0017-00009-0813 NIPPLE, 3/16 IN. 0017-00009-0814 NIPPLE, 1/4 IN. 0017-00009-0842 SPRAY NOZZLE (brass)
  • Page 71 PARTS IDENTIFICATION (Cont.) Model 9100HR (Continued) Item N.B. Part Number Description Ref. (Continued from previous) OK26-01646-0001 ANTI-SLIP PAD OK26-01848-0000 ENDCAP (console) OK26-01687-0003 ENDCAP; REAR RT OK26-01688-0003 ENDCAP; REAR LF OK26-01232-0001 ENDCAP; HANDRAIL ∗ ∗ ∗ ∗ SK26-00566-0000 LEG/LEVELER W/PAD ∗ ∗ ∗ ∗ AK26-00588-0000 CBL CPU/CONSOLE ∗...
  • Page 72 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION (Cont.) Model 9100HR (Cont.)
  • Page 73 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION (Cont.) Model 9100HRT GK26-00026-0100 SERIAL RANGE 349475 & ↑ ↑ ↑ ↑ 4-25-97 Pilot: 348981 - 348995 Item N.B. Part Number Description Ref. 0017-00009-0808 NEEDLE VALVE 0017-00009-0813 NIPPLE, 3/16 IN.
  • Page 74 PARTS IDENTIFICATION (Cont.) Model 9100HRT (Continued) Item N.B. Part Number Description Ref. (Continued from previous) OK26-01646-0001 ANTI-SLIP PAD OK26-01848-0000 ENDCAP (console) OK26-01687-0003 ENDCAP; REAR RT OK26-01688-0003 ENDCAP; REAR LF OK26-01232-0001 ENDCAP; HANDRAIL ∗ ∗ ∗ ∗ SK40-00045-0001 POLAR RECEIVER ∗ ∗ ∗ ∗ OK18-01360-0000 PLASTIC T/BOX ∗...
  • Page 75 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION (Cont.) Model 9100HRT (Cont.)
  • Page 76 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION Model 9100 - GK26-00004-0100, SERIAL RANGE 330068 - 331134 Item N.B. Part Number Description Ref. 0017-00009-0808 NEEDLE VALVE 0017-00009-0813 NIPPLE, 3/16 IN. 0017-00009-0814 NIPPLE, 1/4 IN. 0017-00009-0842 SPRAY NOZZLE (brass)
  • Page 77 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION (Continued) Model 9100T (Continued) Item N.B. Part Number Description Ref. (Continued from previous) OK26-01717-0000 ENDCAP (console) OK26-01687-0003 ENDCAP; REAR RT OK26-01688-0003 ENDCAP; REAR LF OK26-01690-0000 ENDCAP; HANDRAIL ∗ ∗ ∗ ∗...
  • Page 78 Life Fitness 9100 Series Heart Rate and Telemetry Equipped Treadmills PARTS IDENTIFICATION (Cont.) Model 9100 (Cont.)

  • Page 79: Serial Number Location

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills MODEL IDENTIFICATION and SERIAL NUMBER LOCATION Treadmill Model Identification MODEL 9100HR MODEL 9100HR with Telemetry Serial Number Location...

  • Page 80: Wiring Diagram

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills WIRING BLOCK DIAGRAM...

  • Page 81: Preventive Maintenance Tips

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills PREVENTIVE MAINTENANCE TIPS ITEM WEEKLY MONTHLY QUARTERLY BI-ANNUAL ANNUAL Anti-Static INSPECT Cords REPLACE Console Mounting INSPECT Bolts Frame CLEAN INSPECT Striding Belt CLEAN ( Top ) ( VACUUM ) INSPECT Brush...

  • Page 82: Estimated Repair Times

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills ESTIMATED REPAIR TIMES DESCRIPTION TIME IN MINS. EMERSON CONTROLLER 30 MIN 30 MIN TRACKING MOTOR 120 MIN * LINE CORD 15 MIN WAX FILLER KIT (INS) 15 MIN DECK RUBBER MOUNTS (LORD) (4)

  • Page 83: Communicating By Fax

    Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills COMMUNICATING BY FAX If you would like to submit a parts order, or if you need help troubleshooting a problem, we have included, for your convenience, a FAX form on the following page. Simply make a copy (or copies) of the FAX sheet and fill in the necessary information.
  • Page 84 CUSTOMER SUPPORT SERVICES PARTS ORDER SALE ( IF BOTH PLEASE INDICATE ) PRODUCT TROUBLESHOOTING WARRANTY NAME: CUSTOMER NO: DATE: PHONE: FAX: CONTACT NAME: METHOD OF SHIPMENT: 1 DAY 2 DAY GROUND PARTS ORDER FORM ITEM NO. PART NUMBER DESCRIPTION QUANTITY PRODUCT TROUBLESHOOTING PRODUCT NAME: SERIAL NO.
  • Page 85 Life Fitness 9100 Series Heartrate and Telemetry Equipped Treadmills NOTES:...

Table of Contents

Save PDF