Keys Fitness 900 Owner's Manual page 24

TROUBLE SHOOTING (cont.)
KEYS.
=
5.
CONDITION
The walking belt "does not run in
center of roller
The walking belt slips or hesitates
during use.
6, E1 1 appears in the incline window
7. E22 appears in the incline window
8. E33 appears in the incline window
9. E55 appears in the incline window
CORRECTIVE ACTION
A. Adjust rear roller as describer on page 19.
A, Adjust rear [o er as described on pag.e :[91
A*
The error code message "El 1" will be displayed if the
walking belt is moving at a slower speed than displayed
in the speed window, indicating excessive stress on the
motor Remove the safety key and check walking belt
lubrication as described on page 20. If error code
appears again, call our toll-free HOTLINE for additional
assistance. To avoid possible damage to treadmill it
should not be operated until the problem is
corrected,
A,
The error code message "E22" will be displayed if the
electronics senses no walking belt movement,
indicating excessive stress on the motor controller.
Remove safety key and check walking belt lubrication
as described on page 20. If error code appears again,
call our toll-free HOTLINE for additional assistance.
TQ avoid possible damage to treadmill it should
not be operated until the problem is corrected.
A÷
The error code message "E33" will b displayed if the
walking belt is moving at a faster speed than displayed
in the speed window. Remove the safety key and call
our toll-free HOTLINE for additional assistance.
To avoid the possibility of injury do not operate
the treadmill until the problem is corrected.
A=
The error code message "E55" will be displayed if the
electronics loses calibration. Remove safety key and
refer to calibration procedures on page l& If error
code appears again, call our toll-free HOTLINE for
additional assistance. To avoid the possibility of
injury do not operate the treadmill until the
problem is corrected.
24