Walking Belt Adjustment - Keys Fitness 900 Owner's Manual

WALKING BELT ADJUSTMENT
KEYS,
WALKING BELT HAS SHIFTED TO THE LEFT.
First remove the safety key and unplug the power
cord from surge protector. Using the hex key
provided, turn the left rear roller adjustment bolt 1/4
turn in the clockwise direction, Plug the power cord
into the surge protector and re-attach the safety key
and run the treadmill a few minutes at approximately
2,5 mph. Repeat the above procedure until the
walking belt is centered, it may be necessary to set
walking belt tension once you have completed this
procedure.
(See WALKING BELT IS SLIPPING DURING USE
instructions).
WALKING BELT HAS SHIFTED TO THE RIGHT.
First remove the safety key and unplug the power
cord from the surge protector. Using the hex key
provided turn the left rear roller adjustment bolt 1/4
turn in a counterclockwise direction: Plug the power
Cord into the surge protector and re-,attacM the safety
key and run the treadmill a few minutes at
approximately 2.5 mph Repeat the above procedure
until the walking belt is centered, It may be necessary
to set walking belt tension once you have completed
this procedure. ((See WALKING BELT IS SLIPPING
DURING USE instructions)
WALKING BELT IS SLIPPING DURING USE.
First remove the safety key and unplug the power
cord from the surge protector. Using the hex key
provided turn both rear roller adjustment bolts in a
clockwise direction 1/4 turn. Plug thepower cord into
the surge protector and reLattach the safety key and
walk on the treadmill If walking bett is still slipping
repeat above procedure turning the rear roller
adjustment bolts 1/4 turn each time until the walking
belt has the proper tension.
19