Carriage Travel And Initial Setup Mode (Function Code 63); Carriage Travel And Initial Setup Mode - Brother MFC4820C Service Manual

7.5.12 Carriage Travel and Initial Setup Mode (Function code 63)

Function
This function makes the carriage travel to the head replacement position, with Function code 63 +
*.
It may also enable or disable the initial setup mode when the power is applied at the next time,
with Function code 63 + 1 or Function code 63 +3, respectively.
Operating Procedure
(1) Press the 6 and 3 keys in this order in the initial stage of the maintenance mode.
The "MAINTENANCE 63" will appear on the LCD.
(2) To make the carriage travel to the head replacement position, press the * key.
After completion of head replacement or adjustment jobs, press the Stop/Exit key. The
carriage will return to the home position where the print head unit will be locked.
(3) To enable or disable the initial setup mode when the power is applied at the next time, press
the 1 or 3 key, respectively.
If you enable the initial setup mode, wait until the "INIT" appears on the LCD and the print
head unit becomes locked. When the "HEAD LOCKED" appears, turn the power off.
NOTE: Enabling the initial setup mode resets all counts which can be displayed with
Function code 80 (described in Section 7.5.19 "Display of the Equipment's Log") to zero.
If you disable the initial setup mode, the equipment displays the "NOT INIT" on the LCD and
returns to the initial stage of the maintenance mode.
7 -2 1