Using The Door Chime Feature; Partitioned Systems Operation; Indictors In The Partitioning Master Mode - GE LCD Keypad User Manual

USING THE DOOR CHIME FEATURE

The door chime is turned on or off by pressing [r] [1]. Each time [r] [1] is pressed
it will toggle the chime feature on/off and produce a momentary ding-dong sound.

PARTITIONED SYSTEMS OPERATION

If your system is multi-partitioned and the keypad resides in one partition, your
keypad will provide the status of the zones in your partition by using the screen
messages described earlier in this manual. The Master Mode of operation allows
you to temporarily access any partition (providing your code is authorized) within
the system and to perform functions in other partitions. Read this entire manual to
understand the various messages displayed on your keypad screen.

INDICTORS IN THE PARTITIONING MASTER MODE

[BYPASS] will illuminate if ANY area has a zone bypassed.
[AWAY] will illuminate steady if ALL partitions are armed and at least one of
those partitions are in the AWAY mode.
[STAY] will illuminate steady if ALL partitions are armed and at least one of
those partitions are in the STAY mode.
[NIGHT] will illuminate steady if ALL partitions are armed and at least one of
those partitions are in the NIGHT mode.
[AWAY], [STAY], [NIGHT] will all flash if an alarm has occurred in any
partition OR if a partition is in an exit delay with one or more other partitions
disarmed.
SYSTEM READY message will display on the LCD screen if ALL partitions
are ready to be armed.
SOUNDER will sound if ANY area has the sounder on. This includes Entry
delay, Exit delay, Chime, and Alarm.
LCD Keypad
This system is
" "
is not partitioned.
15