Service Display - GE LCD Keypad User Manual

6HUYL.H5HTXLUHG
7\SHUIRUKHOS
Call your service provider promptly if this message is observed. If you see this
display, press [U] [2]. One or more of the following fault messages will be
displayed. Use the scroll keys [x] [y] to browse through them. To exit the service
messages, press [#] [#].
&RQWURO
%R[WDPSHU
&RQWURO
)DLOWR&RPP
&RQWURO
*URXQGIDXOW
&RQWURO
/RVVRIWLPH
&RQWURO
/RZ%DWWHU\
&RQWURO
2YHU.XUUHQW
&RQWURO
3KRQHWURXEOH
&RQWURO
3RZHUWURXEOH
LCD Keypad

SERVICE DISPLAY

The "Service Required" message will be
displayed periodically if the security
system requires service. 
(Optional) The Box Tamper circuit has
activated.
The control attempted to communicate a
message to the Central Station, but was
unsuccessful.
A short to ground has been detected on
a control circuit.
Your system has lost total power and
needs the clock reset.
The standby battery is low.
A short circuit of a control's power
supply has occurred.
The phone line connected to the control
is not operating properly.
The main power to your system is not
on.
19