Using The Print On Back Side Only Option (Dtc520 / Dtc525 Only) - FARGO electronics DTC500 Series Troubleshooting Manual

RESTRICTED USE ONLY

Using the Print on Back Side Only option (DTC520 / DTC525 only)

Use this option to print only onto the backside of cards.
Step Procedure
1 Select this option to print only onto the backside of cards that must have their
Magnetic Stripe or Smart Card chip encoded. (Note: Load the cards in the usual
fashion.)
•
When this option is selected, the Print Both Sides option is automatically
disabled.)
•
When attempting to print a two-page document (if Print Back Side Only is
selected), the first page of the document will print on the backside of the card.
The second page of the document will then be printed on the back of a second
card.
DTC500 Series Card Printer/Encoders Troubleshooting Guide (Rev. 3.0)
FARGO Electronics, Inc.
117