How To Send A Fax - Xerox WorkCentre 5845 Quick Manual

®
Xerox WorkCentre™ 5845/5855/5865/5875/5890

How to Send a Fax

Control panel
1
2
Services Home
1
Job Status
2
Document feeder option
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents
feeder. Place the document face down onto the document glass and register it to the arrow at the top left corner. Close the document feeder.
2. Press the Clear All (AC) button to cancel any previous screen programming selections.
Services Home
3. Press the
Fax
4. Select the button on the touch screen.
Fax
5. If required, select the
Enter Fax Number entry box
6. Select the
7. Select the Add button. If you want to send the document to more than one recipient enter the additional details, one recipient at a time, and
Add
select the button again until all the recipients have been added.
8. Select the Close button to save the information you entered.
9. Select any options required.
10. Press the Start button on the Control Panel to scan the original.
©2012 Xerox Corporation. All rights reserved. XEROX®, XEROX and Design® are trademarks of Xerox Corporation in the U.S. and/or other countries.
IG120003
3
3
4
OR
button on the Control Panel.
tab. This is usually the active tab when the Fax service opens.
and use the numeric kepyad, or the touch screen keypad to enter the recipient's fax number.
Touch Screen
Start
Document glass option
5
4
Clear All
5
Stop
6
OR lift up the document
For more information
Please refer to: user guides - available
via
http://www.support.xerox.com
6