How To Send A Fax - Xerox WorkCentre 5945 How To Make A Copy

®
Xerox WorkCentre™ 5945/5955 Multifunction Printer

How to send a fax

Control panel
1
3
2
Document feeder option
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the
top left corner. Close the document feeder.
2. Press the button on the control panel to cancel any previous programming selections.
Clear All
3. Press the Services Home
4. Select the Fax button on the touch screen.
5. If required, select the
6. Select the Enter Fax Number entry box
fax number.
7. Select the Add button.
• If you want to send the document to more than one recipient enter the additional details, one recipient at a time,
and select the Add
8. Select the Close button to save the information you entered.
9. Select any options required.
10. Press the Start button on the control panel to scan the original.
©2014 Xerox Corporation. All rights reserved. Xerox
BR7341
Or
button.
Fax tab. This is usually the active tab when the Fax service opens.
and use the numeric keypad, or the touch screen keypad to enter the recipient's
button again until all the recipients have been added.
® ®
and Xerox and Design are trademarks of Xerox Corporation in the United States and/or other countries.
5
4
Document glass option
Services Home
1
Job Status
2
Touch Screen
3
Start
4
6
Clear All
5
Stop
6
For more information
Please refer to the user guide -
available at
http://www.support.xerox.com