Disposal Information; Statement Weee (Waste Electrical And Electronic Equipment); Disposal Of Batteries In The Product; Turkey Rohs Compliance - Barco CTHD-61B User Manual

2.4 Disposal information

2.4.1 Statement WEEE (Waste Electrical and Electronic Equipment)

2.4.2 Disposal of batteries in the product

2.4.3 Turkey RoHS compliance

2.5 Service

11
This symbol on the product indicates that, under the European Directive 2012/19/EU govern-
ing waste from electrical and electronic equipment, this product must not be disposed of
with other municipal waste. Please dispose of your waste equipment by handing it over to a
designated collection point for the waste recycling of electrical and electronic equipment. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to pro-
mote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or
your municipal waste disposal service. For details, please visit the Barco website at:
http://www.barco.com/en/AboutBarco/weee.
This product contains batteries covered by the European Directive which must be collected
and disposed of separately from municipal waste.
Pb
If the battery contains more than the specified values of lead (Pb), mercury (Hg) or cadmium
(Cd), these chemical symbols will appear below the crossed-out wheeled bin symbol.
By participating in separate collection of batteries, you will help to ensure proper disposal
and to prevent potential negative effects on the environment and human health.
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.
(Republic of Turkey: In conformety with the WEEE Regulation)
This product contains no user serviceable parts. If the product fails to function as expected,
please first check that all connections are properly made, and that the power cord is properly
connected. Please check that the projector as well as the video and computer sources are all
switched on. Cables and cords may break over time. Try to change cables and cords, in case
there is a bad or intermittent connection. Check if the circuit breaker or mains fuse is intact.
In the event of product failure, please contact your reseller. You should prepare a descrip-
tion of the symptoms of failure you experience. Please also state product number and serial
number as printed on the label on the bottom or side of the projector.
Service personnel must use UV radiation eye- and skin protection during servicing