Loading Paper In The Front Paper Feed Slot - Epson All in One Printer User Manual

User's Guide

Loading Paper in the Front Paper Feed Slot

You can only load one sheet of paper in the front paper feed slot. Because the front paper feed slot also serves the
output tray, you cannot load paper during printing.
Important:
c
You can load paper with a thickness of 0.08 to 0.11 mm in the front paper feed slot. However, even if the thickness is
within this range, some papers may not be fed correctly depending on their hardness.
1. Slide out the output tray.
2. Slide the edge guides to adjust to the paper size you want to use.
3. Insert the paper with the printable side facing down until the printer partially pulls in the paper.
Important:
c
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
❏ Keep the paper straight to prevent it from being fed askew.
Note:
If the printer does not pull in the paper, load it again.
Loading Paper
46