Installing Applications; Updating Applications And Firmware - Epson All in One Printer User Manual

User's Guide
Note:
If you cannot find the application you want to uninstall in the application list, you cannot uninstall using the
Uninstaller. In this situation, select Go > Applications > Epson Software, select the application you want to uninstall,
and then drag it to the trash icon.
Related Information
"EPSON Software Updater" on page 135
&

Installing Applications

You can install the applications described in this manual by following the instructions below.
Note:
❏ Log on to your computer as an administrator. Enter the administrator password if the computer prompts you.
❏ When reinstalling an application, you need to uninstall it first.
1. Quit all running applications.
2. When installing the printer driver or EPSON Scan, disconnect the printer and the computer temporarily.
Note:
Do not connect the printer and the computer until you are instructed to do so.
3. Install the applications by following the instructions on the website below.
http://support.epson.net/setupnavi/
Note:
❏ Install Document Capture Pro from the website below.
http://support.epson.net/
http://assets.epson-europe.com/gb/en/document_capture_pro/index.html
❏ For Windows, you can also use the software disc that came with the printer.
Related Information
"Uninstalling Applications" on page 135
&

Updating Applications and Firmware

You may be able to clear certain problems and improve or add functions by updating the applications and the
firmware. Make sure you use the latest version of the applications and firmware.
1. Make sure that the printer and the computer are connected, and the computer is connected to the internet.
2. Start EPSON Software Updater, and update the applications or the firmware.
Important:
c
Do not turn off the computer or the printer while updating.
Applications and Network Service Information
137
(Europe)