Scanning To The Cloud; Scanning Using Document Capture Pro (For Windows Only) - Epson All in One Printer User Manual

User's Guide
6. Press Settings, and then make scan settings.
Note:
❏ When you select PDF as the file format, you can set a password to protect the file. Select PDF Settings, and then
make settings.
❏ Press Preset to save your settings as a preset.
x
7. Press the button.
The scanned image is saved.
Related Information
"Part Names and Functions" on page 16
&
"Placing Originals" on page 49
&
"Scan Mode" on page 24
&
"Presets Mode" on page 37
&

Scanning to the Cloud

You can send scanned images to destinations that you specified on the Epson Connect user page.
See the Epson Connect portal website for details.
https://www.epsonconnect.com/
http://www.epsonconnect.eu

Scanning Using Document Capture Pro (for Windows Only)

You can scan the original using the settings specified in Document Capture Pro.
Note:
❏ Before scanning, install Document Capture Pro and make settings for the job.
❏ Before scanning, connect the printer and the computer to the network.
1. Place the originals.
2. Enter Scan from the home screen.
3. Select Document Capture Pro.
4. Press Select Computer, and then select the computer registered to the job in Document Capture Pro.
Note:
❏ If you select Option > Network Scanning Settings, and enable Protect with password in Document Capture Pro,
enter a password.
❏ If you set only one job, proceed to step 6.
5. Select the job.
6. Press the area in which the job content is displayed, and check the job details.
Scanning
(Europe only)
80