Table of Contents
Advertisement
Remote Control
Name
K
Split button
Press this button to split the screen in two and project two
images simultaneously.
L
Images are paused or unpaused.
Freeze button
Screen adjustment
Name
M
Auto button
If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
N
The Aspect Ratio changes each time the button is pressed.
Aspect button
p.35
s
O
Color Mode button
Each time the button is pressed, the Color Mode changes.
Others
Name
P
Outputs remote control signals.
Remote control light-
emitting area
Q
Help button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
R
Connects the optional remote control cable set and
Remote port
outputs signals from the remote control. When the remote
control cable is plugged into this remote port, the remote
receiver is disabled.
S
Default button
Reset to default the setting values being adjusted in some
configuration menus.
T
Use this button to enter passwords, IP Address from the
Num button
Network, and so on. s
Function
Function
Function
p.44
Name
U
Numeric buttons
Use this button to enter passwords, remote control ID
settings, IP Address from the Network, and so on.
s p.30,
V
A light is emitted when outputting remote control signals.
Indicators
Remote Control Operating Range
a
• If you use the optional remote control cable set (ELPKC28) to
connect the remote control to the projector, the operating range is
20m.
• To restrict reception of the operation signals from the remote
control, set Remote Receiver.
Press the [Menu] button > Settings > Remote Receiver
Function
p.44
27
Advertisement
Table of Contents
