Before Installation (Check Items You Are Interested In); Setting Basic Operations - Epson EB-Z8455WU Installation Manual

Before installation (Check items you are interested in)

Setting Basic Operations

Items you are interested in
Turn the projector on or off by turning the main power supply
on or off or by plugging in or unplugging the power cable.
Stop projection automatically when no image signal is being
input and no operations are carried out.
Use the projector above an altitude of 1500 m.
Turn off the confirmation buzzer that beeps when the power
turns on or off.
Install the Wireless LAN unit.
Direct Power On: You can start projection automatically by setting Direct Power On to On. (Default: Off)
Press the [Menu] button > Extended > Operation > Direct Power On
Direct Shutdown: This is integrated with the power supply and enables you to finish projection automatically.
Set Sleep Mode to On. (Default: Off)
Press the [Menu] button > Extended > Operation > Sleep Mode
Set the time until the projector enters sleep mode in Sleep Mode Timer. You can set within a range of 1 to 30 minutes.
(Default: 10min.)
Press the [Menu] button > Extended > Operation > Sleep Mode Timer
Set High Altitude Mode to On. (Default: Off)
Press the [Menu] button > Extended > Operation > High Altitude Mode
Set Beep to Off. (Default: On)
Press the [Menu] button > Extended > Operation > Beep
Refer to "Installing the Wireless LAN Unit" for the method of installation. s
Methods
p.19
10