Table of Contents
Advertisement
Setting Up
Once this setting has been made, the projector that can be operated by the
remote control is limited.
a
The remote control ID setting is saved in the remote control. Even if
the remote control batteries are removed to replace them and so on,
the stored ID setting is retained. However, if the batteries are left out
for a long time, it is reset to the default value (ID0).
Setting the Time
You can set the time for the projector. The set time is used for scheduling
and for wireless LAN authentication.
Press the [Menu] button > Extended > Time/Schedule Settings > Date &
Time
a
• When you turn on the projector for the first time, the message "Do
you want to set the time?" is displayed. When you select Yes, the
following screen displayed.
• Adjust the focus if messages are blurred. s
Date
Time
Time Difference (UTC)
Change DST Settings
Internet Time
p.23
Internet Time Server
Daylight Saving Time screen
Daylight Saving Time
DST Start
DST End
Submenu Name
Set today's date.
Set the current time.
Set the time difference from Coordinated Universal
Time. (Japan: +9:00)
Displays the screen to set the daylight saving time.
Set to On to update the time automatically through an
Internet time server.
Input the IP address for an Internet time server.
Submenu Name
Set whether or not (On/Off) to activate the daylight
saving time. DST Adjustment (min) adjusts the time
difference between the standard time and the daylight
saving time.
Set the date and time to start the daylight saving time.
Set the date and time to end the daylight saving time.
31
Function
Function
Advertisement
Table of Contents
