Changing The Aspect Ratio Of The Projected Image; Changing Methods - Epson EB-Z8455WU Installation Manual

Projecting Images
Correction range
You can correct in increments of 0.5 pixels up to a maximum of 7 pixels
vertically and 32 pixels horizontally.
a
Each time you press the [Enter] button, you can show or hide the
image and the grid.
Changing the Aspect Ratio of the Projected
Image
You can change the aspect ratio of the projected image to suit the type, the
ratio of height and width, and the resolution of the input signals.
The aspect modes that can be set depend on the type of image that is being
projected.

Changing methods

Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
Aspect Mode
Projects in an appropriate aspect ratio based on
Auto
information from the signal being input.
Projects while retaining the aspect ratio of the input image.
Normal
Projects at an aspect ratio of 4:3.
4:3
16:9 Projects at an aspect ratio of 16:9.
Projects at the full size of the projected screen.
Full
Projects by enlarging the input image to the full width of
Zoom
the projected screen while retaining the aspect ratio. Areas
that exceed the edges of the projected screen are not
projected.
Native Projects to the center of the projected screen at the
resolution of the input image. Areas that exceed the edges
of the projected screen are not projected.
35
Explanation