Table of Contents
Advertisement
Network Setup
About Event ID
If a network connection error occurs, an error log (Event ID) is displayed on the following screen.
Standby screen when the Source is set to LAN
Check the numbers and then apply the following countermeasures.
Event ID
0432
Failed to startup EasyMP Network Projection.
0435
0434
Network communication is unstable.
0481
0482
0485
0433
Cannot play transferred images.
0484
Communication was disconnected from the computer.
04FE
EasyMP Network Projection ended unexpectedly.
04FF
A system error occurred in the projector.
0891
Cannot find an access point with the same SSID.
0892
The WPA/WPA2 authentication type does not match.
Cause
Press the [Menu] button > Info menu screen
Remedy
Restart the projector.
Check the network communication status, and reconnect after waiting for a
while.
Restart EasyMP Network Projection.
Check the status of network communications. Restart the projector.
Restart the projector.
Set the computer, the access point, and the projector to the same SSID.
Check that the wireless LAN security settings are correct. s
61
p.52
Advertisement
Table of Contents
