Table of Contents
Advertisement
Network Setup
Submenu
SSID
(This cannot be set when SSID Auto Setting is set to
On.) Enter an SSID. When an SSID is provided for the
wireless LAN system in which the projector
participates, enter the SSID. You can enter up to 32
single-byte alphanumeric characters. (^ cannot be
used. ) Set SSID to blank or ANY to establish an ANY
connection.
Channel
Select the channel you want to use. If interference
from other signals occurs, use a different channel.
SSID Display
To prevent the SSID from being displayed on the LAN
Standby screen, set this to Off.
IP Address Display
To prevent the IP address from being displayed on the
LAN Standby screen, set this to Off.
f
When you have finished making settings, select Setup
complete.
Infrastructure connection settings (Advanced)
This setup method connects a computer to the projector through an access
point in a wireless LAN environment.
Use this method when connecting over wireless LAN using the "EasyMP
MultiPC Projection" software supplied.
a
Check the settings (SSID and security) for the access point you
want to connect to.
Check with the network administrator.
b
Display the Network Configuration screen on the projector.
Press the [Menu] button > Network > Network Configuration
Function
c
Select the Wireless LAN menu.
The following screen is displayed.
d
Set Wireless LAN Power to On.
e
Set Connection Mode to Advanced.
f
Set other items as necessary.
Submenu
Wireless LAN system
Sets the wireless LAN system. Normally this should be
set to 802.11b/g/n.
The connection method is selected automatically
according to the access point settings. In an area that
does not support 802.11n, only 802.11b/g is displayed.
49
Function
Advertisement
Table of Contents
