Table of Contents
Advertisement
Before installation (Check items you are interested in)
Installation Settings
Items you are interested in
Tip for adjusting the position of the projected image
Tilt the projector and install.
Precautions when the projector is suspended from a ceiling • To fix the projector, use the four screw holes for suspending from a ceiling.
Use when the ambient temperature is high.
* EB-Z8455WU/Z8450WU/Z8355W/Z8350W/Z10005/Z10000 only
Set the focus, zoom, and lens shift at least 30 minutes after you start the projection, because images are not
stable right after turning on the projector.
Set Direction according to the tilt of the projector. (Default: Normal) s
Press the [Menu] button > Extended > Direction
• Never remove the handle. The projector or external equipment may fail if used with the handle removed.
• Remove the feet and attach the covers supplied. Always attach the foot covers when the feet are removed.
• Do not use the feet screw holes to fix the projector or attach other screws. Malfunction may result.
According to the ambient temperature, set Power Consumption
Normal 1
Altitude 0 to 1500 m: 0 to +45˚C (No condensation)
Altitude 1500 m to 3048 m: 0 to +40˚C (No condensation)
Projects at normal brightness.
Normal 2
Altitude 0 to 1500 m: 0 to +50˚C (No condensation)
Altitude 1500 m to 3048 m: 0 to +45˚C (No condensation)
Adjusts the brightness automatically according to the surrounding environment.
Press the [Menu] button > Settings > Power Consumption
Methods
p.22
*
.
16
Advertisement
Table of Contents
