Advertisement
1. Tap Menu > Christie IMB > System.
2. Tap General > IMB Upgrade.
3. Select an upgrade file in the Upgrade Files on Server list.
4. Select Full Install to upgrade all files
- or -
Select Differences to upgrade the files that are different from the upgrade file.
- or -
Select Factory Install to upgrade all files to the factory settings.
5. Tap Upgrade.
6. Tap Yes.
7. Restart the Christie IMB-S2 twice when the software upgrade is complete.
If you purchased licenses to enable additional features, you do not need to purchase new licenses.
However, you will need to upload them again when you replace the CF card.
1. Tap Menu > Christie IMB > System > Licenses.
2. Tap Add.
3. Insert a USB flash drive with the Christie IMB license into the USB port on the side of the
touch panel controller (TPC).
4. Select a license file and then tap Accept.
North and South America: +1-800-221-8025 or
Europe, Middle East, and Africa: +44 (0) 1189 778111 or
Asia Pacific:
tech-asia@christiedigital.com
Christie IMB-S2 CompactFlash Card Replacement
020-200260-01 Rev. 1 (11-2013)
tech-support@christiedigital.com
techsupport-emea@christiedigital.com
5
Advertisement
