Advertisement
5. Remove the card cage faceplate by the handles and set it on a stable surface.
1. On the underside of the Christie IMB-S2, pull the CF card retaining clip down and out of the
way.
2. Pull the CF card (A) out of the housing and discard it following your local regulations for
electronic waste disposal.
3. Slide the new CF card into the housing and then push the retaining clip down.
1. Push the card cage faceplate into the projector.
2. Install the 8 card cage faceplate screws.
3. Replace the anti-tamper label on the side of the card cage.
4. Install the card cage surround.
5. Connect the projector to AC power and then turn it on.
Christie IMB-S2 CompactFlash Card Replacement
020-200260-01 Rev. 1 (11-2013)
3
Advertisement
