Advertisement
You must complete the Marriage wizard to display secure content. Marriage permission is required to
complete marriage and only Christie accredited technicians are authorized to activate projector
marriage.
1. Tap Menu > Service Setup > IMB Marriage.
2. Complete the Marriage wizard.
3. Tap Finish.
If a back up file is not available, you will need to manually re-configure these settings:
Network and storage settings
Speaker and audio channel mapping
Automation macro definitions
Multi-projector configuration
Scheduled entries
For these procedures, see the Christie IMB User Manual on the Christie web site.
1. Tap Menu > Christie IMB > System.
2. Tap General > Backup/Restore.
3. Tap Browse and browse to the location of the file.
4. Select the file.
5. Tap Accept.
6. Select the backup file in the Restore Files on Server list.
7. Tap Restore.
8. Tap Yes.
Upload and install the latest Christie IMB software so all of the Christie IMB software components are
the same version. Contact Christie Technical Support to request the latest version of the Christie IMB
software.
1. Insert a USB flash drive with the upgrade package into the USB port on the side of the touch
panel controller (TPC).
2. Tap Menu > Christie IMB > System.
3. Tap General > IMB Upgrade.
4. Tap Browse and browse to the location of the file.
5. Select the file.
6. Tap Accept.
Christie IMB-S2 CompactFlash Card Replacement
020-200260-01 Rev. 1 (11-2013)
4
Advertisement
