Arctic Cat 2008 300 DVX Owner's Manual page 35

Active Riding
Braking/Stopping
Coming to a stop should be a slow, easy process. Always allow plenty
of room and time to stop smoothly. Sometimes quick stops are ine-
vitable, so always be prepared. Whether you're stopping slowly or
stopping quickly, do this:
1. Release the throttle lever; then apply the hand brake.
2. If the wheels lock, release the brake for a second; then apply it
again.
3. When coming to a complete stop, release the throttle lever com
pletely.
4. Never "ride" the brake. Even maintaining minimal pressure on the
brake lever or brake pedal will cause the brake pads to drag on
the disc and may overheat the brake fl uid, disc, and pads causing
the brakes to "fade" or become "spongy."
Excessive repetitive use of the hydraulic brake for high speed stops
will cause overheating of the brake fl uid and premature brake pad
wear which will result in an unexpected loss of brakes.
Use only Arctic Cat approved brake fl uid. Never substitute or mix
different types or grades of brake fl uid. Brake loss can result. Check
brake fl uid level and pad wear before each use. Brake loss can
result in severe injury or even death.
34
! WARNING
! WARNING