Setting The Ringer Level - Icom IC-F29SR Operating Instructions Manual

4
SETTINGS

Setting the ringer level

You can adjust the ringer level between 1 and 5, or 1
(linked) and 5 (linked).
When a linked option is selected, you can adjust the
ringer level by rotating [VOL].
[VOL] to turn OFF the power.
Rotate
q
Set [ROTARY SELECTOR] to Channel 16.
w
While holding down
e
ON the power and enter the ringer level adjustment
mode.
Push [Upper] to increase, or push [Lower] to de-
r
crease the ringer level as shown to the right.
• A beep sounds after pushing [Upper]. Therefore, you
can determine the current level setting by the increasing
loudness of the beep that sounds.
• To determine if you have selected a linked level, set [VOL]
to minimum, then push [Upper] up to 10 times, listening
for the loudest beep (level 5). Pushing [Upper] once after
the loudest beep will select 1 (Linked). Repeatedly push
[Upper] or [Lower] to select the desired linked level.
[VOL] to turn OFF the power to exit the ringer
Rotate
t
level adjustment mode.
[Lower], rotate [VOL] to turn
[ROTARY SELECTOR]
[Upper]
[Lower]
7
[VOL]
Pushing Pushing
[Upper] [Lower]
5
4
3
2
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)