Setting The Squelch Level; Settings - Icom IC-F29SR Operating Instructions Manual

4

SETTINGS

Setting the squelch level

The squelch circuit mutes the received audio signal,
depending on the signal strength.
Rotate [VOL] to turn the transceiver power OFF.
q
[ROTARY SELECTOR] to any channel other
Set
w
than Channel 16.
While holding down
e
ON the power and enter the squelch level adjust-
ment mode.
[Upper] to increase the squelch level (tight
Push
r
squelch), or push [Lower] to decrease the squelch
level (loose squelch).
• The adjustable range is 0 (open squelch) and 1 (loose
squelch) to 9 (tight squelch).
• A beep sounds after pushing [Upper] or [Lower]. An
error beep sounds if you try to exceed the adjustable
range.
NOTE: The Beep function should be turned ON. (p. 5)
[VOL] to turn OFF the power to exit the
Rotate
t
squelch level adjustment mode.
[Upper], rotate [VOL] to turn
[ROTARY SELECTOR]
[Upper]
[Lower]
11
[VOL]