Sort/ Group Output To The Secondary (Sub) Tray - Konica Minolta bizhub PRO 950 User Manual

11
Reminder
The primary (main) tray gradually goes down while printed materials are
output. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
Be careful not to exceed the finisher tray capacity when selecting the
print quantity, otherwise unexpected trouble may be caused.

11.2.3 Sort/ Group Output to the Secondary (Sub) Tray

A machine with Finisher FS-528/FS-611 installed is set to output sorted sets
to the primary (main) tray by default, regardless of whether or not to be
equipped with other optional devices. Change the output tray and select the
desired output mode by following the procedure below.
Procedure
1
Position the original.
2
Touch [Output Setting] on the Copy Screen.
The Output Setting Screen will be displayed.
3
Touch [Sub Tray].
11-10
Output Setting
bizhub PRO 950