Konica Minolta bizhub PRO 950 User Manual page 319

Application Functions
– To restore the previous setting, touch [Cancel].
– To release the Book Copy function with the current setting re-
mained, touch [Function Off].
7
Touch [OK] on the Application Screen.
The Copy Screen will be restored, with the [Book Copy] key displayed
under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
The [Separate Scan] key on the Copy Screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
8
Select additional copy conditions, as desired.
Available paper sizes are 8.5" × 11" v, A4 v, and B5 v.
–
– Auto Zoom and Auto Paper are released and ×1.0 magnification is
selected automatically.
– Be sure not to select [Top] as binding direction on the Output Ap-
plication Screen.
9
Press [Start] on the control panel.
– Scanned image will be stored into memory. Repeat this procedure
to complete scanning all originals.
– When scanning from the original glass, Non-Image Area Erase and
Image Centering are automatically selected.
Be sure to keep the ADF open throughout the scanning job.
10
When all originals are scanned, touch [Separate Scan] to exit the Sep-
arate Scan mode.
11
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
bizhub PRO 950
10
10-37