Rear Panel Connectors And Controls - ASL INTERCOM VIPET Installation And Maintenance Manual

Rear Panel Connectors and Controls

Figure 2 VIPET Rear Panel
2 3
1
WARNING: SHUT DOWN UNIT
BEFORE REMOVING POWER
IN 18-40V OUT
DC 1 DC 2 AUX 1 AUX 2
- - - -
+ + + +
VIPET-PSU-24V
Rear Panel
VIPET-PSU-24V (DC Power Supply Option)
PSU1 and PSU2 power supply connector
1
Earth Lift switch. (Only on original 24V VIPET version.)
2
AUX1 and AUX2 auxiliary 12V DC output. (Only on original 24V VIPET version.)
3
VIPET-PSU-MAINS (Mains Power Supply Option)
230V AC Power Supply Input (IEC320 socket)
4
VIPET - Hardware Installation and Maintenance Guide
4
VIPET-PSU-MAINS Rear Panel
5 6
CONTROL PORT POWER
COM1
21 20 19 18
17
U-0582-0512.doc – Issue: 05 complete, approved
7 8
VIPET
EXP. 1 EXP. 2
MANUFACTURED IN ENGLAND BY APPLICATION SOLUTIONS LTD.
WARNING: THIS PRODUCT CONTAINS A LITHIUM BATTERY.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
16
15 14 13 12 11
Page 5 of 24
9
10