Download  Print this page

Connecting The Antennas - Kenwood VRS-7100 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Setting up the system

Connecting the antennas

AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AM antenna terminal connections
1 Push lever.
2 Insert cord.
18
EN
3 Release lever.
For the U.S.A. and Canada
For Europe and Australia
Antenna adaptor
ANTENNA
FM 75 Ω
GND
AM
White
Black
Use an antenna adaptor
(Commercially available)
FM outdoor antenna
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM antenna terminal connections
Insert the connector.
(For the U.S.A. and Canada)
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75Ω terminal.
FM indoor antenna
FM indoor antenna
Attach to the stand
AM loop antenna
(For Europe and Australia)

Advertisement

Table of Contents
loading

  Also See for Kenwood VRS-7100

  Related Manuals for Kenwood VRS-7100