Pre Out Connections - Kenwood VRS-7100 Instruction Manual

Setting up the system

PRE OUT connections

The receiver has additional PRE OUT jacks.
Note that the output from the PRE OUT jacks needs to be connected
to an external power amplifier.
If you want to connect surround back speakers to these jacks, be always
sure to connect two surround back speakers for the left and right.
For U.S.A. and Canada
R L
SUB
WOOFER SURROUND BACK
PRE OUT
Example:
¶ When you want to connect two surround back
speakers.
¶ When the subwoofer is connected to the
SURR BACK/SW terminals.
Example:
¶ When the surround back speaker is connected to
the SURR BACK/SW terminals.
16
EN
Surround Back speakers
L R
Power amplifier
Subwoofer
Power amplifier
Powered subwoofer
¶ Connecting a speaker cord directly to a PRE OUT jack will not
produce any sound from the speaker.
For Europe and Australia
R L
SUB
WOOFER SURROUND BACK
PRE OUT
Example:
¶ When you want to connect two surround back
speakers.
¶ When the subwoofer is connected to the
SURR BACK/SW terminals.
Example:
¶ When the surround back speaker is connected to
the SURR BACK/SW terminals.
Surround Back speakers
L R
Power amplifier
Subwoofer
Power amplifier
Powered subwoofer