Download  Print this page

Names And Functions Of Parts; Main Unit - Kenwood VRS-7100 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Names and functions of parts

Main unit

Input mode indicators
Speaker selection indicators,
Input channel indicators (The Input channel
indicators lights up to indicate the channels
contained in the input signal. The "S" indicator
lights when the surround component consists
of a single channel.)
For Europe and Australia
1
2
%
$
View when the GAME/ FRONT AUX jack
cover is open.
1 (For the U.S.A. and Canada)
POWER ON/STANDBY
Use to turn the power ON/STANDBY.
(For Europe and Australia)
ON/STANDBY
key
Use to turn the power ON/STANDBY.
STANDBY indicator
Lights when the power is in the standby
mode.
2 DUAL SOURCE VOLUME 5/∞ keys
Use to adjust the volume in the DUAL
SOURCE mode.
DUAL SOURCE INPUT key
Use to select the input for the DUAL SOURCE
mode.
DUAL SOURCE ON/OFF key
Use to switch the DUAL SOURCE mode ON/
OFF.
3 BAND key
Use to select the broadcast band.
4 AUTO/MONO key
Use to select the auto or manual tuning
mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by the remote control unit.
6
EN
CLIP indicator
MUTE indicator
Frequency display,
Input display, Preset
channel display,
Listen mode display
3 4
5
#
5 Dolby D indicator
key ¢
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator
¢
Lights when the receiver is in the DTS mode.
Dolby H indicator
Lights when the Dolby H mode is ON.
DUAL SRC indicator
Lights when the DUAL SOURCE mode is
ON.
6 Joystick
º
MULTI CONTROL % / fi
º
Use to control a variety of settings. Use to
tuning of radio broadcasting.
MULTI CONTROL @ / #
º
Use to control a variety of settings. Use to
selection of preset radio stations.
ENTER
Use to control a variety of settings. Use to
presetting of radio stations.
7 MULTI CH indicator
Lights during multi-channel playback.
Listen mode indicators
Dolby Headphone mode indicator,
Dolby Virtual Speaker mode indicator
Display
·
º
¡£‹
¡£›
¡£‹
ACTIVE EQ indicator,
DUAL SOURCE Input indicator,
96 kHz fs indicator
AUTO indicator, ST. indicator,
TUNED indicator, Sleep Timer indicator,
TONE indicator
For Europe Only :
RDS indicator, PTY indicator
6
7 8
@
8 ACTIVE EQ key
Use to select ACTIVE EQ's setting.
9 VOLUME CONTROL knob
Use to adjust the receiver volume.
0 INPUT SELECTOR key
Use to select input sources.
! SETUP key
Use to select the speakers'settings etc.
Use to select the REC MODE.
@ LISTEN MODE key
Use to select the listening mode.
# GAME jacks
$ FRONT AUX jacks
% PHONES jack
Use for headphone listening.
9
0
!
ª
ª
¡£¤
&¶º
º

Advertisement

Table of Contents
loading

  Also See for Kenwood VRS-7100

  Related Manuals for Kenwood VRS-7100