Download  Print this page

Normal Playback; Listening To A Source Component - Kenwood VRS-7100 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Normal playback

Some preparatory steps are needed before starting playback.
POWER ON/STANDBY
ON/STANDBY
RCV Mode
POWER RCVR
Input Mode
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
POWER ON/STANDBY
POWER RCVR key).
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 1), OPT 1 (VIDEO 2), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, make sure that the input mode setting is correct for the
type of audio signal to be used. 8
INPUT SELECTOR
Input selector keys
or ON/STANDBY
key (or the

Listening to a source component

1
Press the INPUT SELECTOR key (or the Input selector
keys/ DVD, VID1, VID2, AUX, F.AUX, Game, TUNER) to
select the source you want to listen to.
1 Tuner (FM/AM broadcast reception)
2 "DVD"
3 "VIDEO1"
4 "VIDEO2"
5 "GAME"
6 "FRONT AUX"
7 "AUX"
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOL +/- keys) to
adjust the volume.
INPUT SELECTOR
VOLUME CONTROL
Input selector keys
VOL + / -
29
EN

Advertisement

Table of Contents
loading

  Also See for Kenwood VRS-7100

  Related Manuals for Kenwood VRS-7100