Download  Print this page

Preparing For Playback; Speaker Settings - Kenwood VRS-7100 Instruction Manual

Audio video surround receiver
Hide thumbs

Advertisement

Preparing for playback

Speaker settings

To enable you to obtain optimum enjoyment from the receiver's listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, surround and surround back speakers) as described below.
POWER ON/STANDBY
ON/STANDBY
RCV Mode
POWER RCVR
1
Turn on the power to this receiver by pressing the POWER ON/
STANDBY
(For U.S.A. and Canada) or ON/STANDBY
Europe and Australia) key (or POWER RCVR key).
2
If you want to use the remote control unit, press the RCV Mode
key on the remote to set it to the receiver control mode.
3
Initiate the setup mode.
1 Press the SETUP key (or the Setup key).
2 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)
for the following displays.
1 "SP SETUP"
2 "SP LEVEL"
3 "DISTANCE"
4 "ASSIGN."
5 "LFE LEVEL"
6 "GAME FUNC"
7 "EXIT"
÷ While the main setup screen is displayed, the setup mode
can be canceled by pressing the SETUP key (or the Setup
key) or selecting "EXIT" and then pressing the ENTER (or the
Enter key).
4
Select the setup method.
1 Select "SP SETUP" and press the ENTER key (or the
Enter key) to select the speaker setup method.
24
EN
ENTER
MULTI CONTROL %/fi/@/#
SETUP
Multi %/fi/@/#
Enter
Setup
2 Use the MULTI CONTROL @ / # (or the Multi @ / # keys)
for the following displays.
1 "HTB1 6.1CH": Select "HTB1 6.1CH" if you use speaker
system KS-3100EX. *
2 "HTB1 5.1CH": Select "HTB1 5.1CH" if you use speaker
system KS-2100HT. *
3 "HTB2 6.1CH": Select "HTB2 6.1CH" if you use speaker
system KS-708HT+KS-308EX or KS-308HT+KS-308EX. *
4 "HTB2 5.1CH": Select "HTB2 5.1CH" if you use speaker
system KS-708HT or KS-308HT. *
5 "HTB3 6.1CH": Select "HTB3 6.1CH" if you use speaker
system KS-908EX. *
6 "HTB3 5.1CH": Select "HTB3 5.1CH" if you use speaker
system KS-908HT.*
7 "CUSTOM": Select to set up the speakers according to
the speaker system in use. (Speaker setup is required
every time after the speaker system is changed.)
8 "EXIT": Press the ENTER (or the Enter key) again to
return to the main setup displays.
* Model availability may differ depending on the country
and sales area.
÷ When the 5.1 channel speaker system configuration is used
or the speaker setting is set to "BS/SW OFF", the PL IIx, DTS-
ES and DOLBY EX listen modes cannot be selected.
If you selected "HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH",
"HTB2 5.1CH", "HTB3 6.1CH" or "HTB3 5.1CH" in the above:
Press ENTER (or the Enter key), then press MULTI CONTROL
% / fi (or the Multi % / fi keys) to select "OK", and press ENTER
(For
(or the Enter key) again to establish the setup.
÷ Select "CANCEL" to return to the status before setup.
÷ When you use a KENWOOD speaker system and select
"HTB1 6.1CH", "HTB1 5.1CH", "HTB2 6.1CH", "HTB2 5.1CH",
"HTB3 6.1CH" or "HTB3 5.1CH" set the speaker setup, the
audio will be corrected automatically according to the
speaker characteristics.
If you selected "CUSTOM" in the above:
Press ENTER (or the Enter key) to proceed to detailed setups.
The flow of the SETUP is as follows;
SP SETUP
HTB 1 6.1CH
HTB 1 5.1CH
HTB 2 6.1CH
HTB 2 5.1CH
HTB 3 6.1CH
HTB 3 5.1CH
CUSTOM
EXIT
Subwoofer
Front
Center
Surround
Surround
Back
BS/SW
amp
Subwoofer
Re-mix
÷ The subwoofer setting indication "SUBW" appears.
SP LEVEL
DISTANCE
ASSIGN.
AUTO
L
METERS
Digital
C
D4 Video
FEET
R
EXIT
EXIT
SR
Front Left
BS
(RB/LB)
Center
SL
SW
Front Right
MANUAL/OFF
Right Surround
L
Surround Back
(Right/Left
C
Surround Back)
R
Front Left
SR
Subwoofer
BS
(RB/LB)
SL
SW
EXIT
s U B W
Continued to next page
LEF LEVEL
GAME FUNC
EXIT
MODE 1
MODE 2
OFF
0 N

Advertisement

Table of Contents
loading

  Also See for Kenwood VRS-7100

  Related Manuals for Kenwood VRS-7100